[BLDG-SIM] environmental temperatures in DOE-2

[PC Thomas]

Hello to all Simulation Specialists !

Does anyone know how I could use DOE-2 to generate envirnomental
temperatures for a zone.  I know there was some work done to estimate
surface temperatures, could that be used in conjuction with zone air
temperatures to calculate environmental temperatures?

Thank you, in advance, to all who resond (and take the time to read this
message)!

PC
****************************************************************************
*  P.C. Thomas                                                             *
*  Project Scientist &                                                     *
*  PhD Research Scholar                                                    *
*  Faculty of The Built Environment                                        *
*  The University of New South Wales                                       *
*  SYDNEY NSW 2052 AUSTRALIA                                               *
*                                                                          *
*                                                  Mobile +61 417 405 478  *
*                                                     Tel +61 2 9385 6373  *
*                                                     Fax +61 2 9662 0205  *
*                                          e-mail : pc.thomas at unsw.edu.au  *
*                                http://www.fbe.unsw.edu.au/units/SOLARCH  *
****************************************************************************

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM