[Bldg-sim] eQUEST simulation

[Aulbach, John]

I still run the original DOE-2.1E, but eQuest is DOE-2.2. So, as if to
satisfy government bill collection computers by writing a check for $0.00,
try modeling the building that has a fan with zero (or virtually zero)
airflow and kW in the fan ?

-----Original Message-----
From: Gllf22 at aol.com [mailto:Gllf22 at aol.com]
Sent: Thursday, April 25, 2002 3:05 PM
To: Bldg-sim at gard.com
Subject: [Bldg-sim] eQUEST simulation


I would like to use eQUEST to simulate buildings that do not have any HVAC 
equipment and that will be naturally ventilated.  I am interested in getting

hourly temperature of different locations within the buildings.  I would
like 
to get some advice and guidance on how to do this?  Thanks in advance for
any 
suggestions.

-Gladys Lopez



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20020425/704bb3d5/attachment-0002.htm>