[Bldg-sim] Light Shelves
Jon McHugh
mchugh at h-m-g.com
Mon Sep 30 11:12:54 PDT 2002
Wade,
Look at the method using daylight factors. Your physical model has to create results for several sun angles and an overcast sky - please refer to the DOE-2 manual for more details.
Jon McHugh, PE, LC
Heschong Mahone Group
11626 Fair Oaks Blvd #302
Fair Oaks, CA 95628 (Sacramento)
(916)962-7001
(916)962-0101 FAX
e-mail: mchugh at h-m-g.com
URL: www.h-m-g.com
-----Original Message-----
From: Wade McLaughlin [mailto:wmclaughlin at dmiinc.com]
Sent: Monday, September 30, 2002 8:51 AM
To: Bldg-sim at gard.com
Subject: [Bldg-sim] Light Shelves
I see from the thread that this question may have gone unanswered in the past. I'll give it a try anyway.
I know that PowerDOE is not explicitly capable of modeling light shelves for daylight dimming measures. However, has anyone had any success manipulating a model to get reasonable approximations? I have results from a physical model that I can use to calibrate my methods, but I'm not sure where to start.
Many thanks in advance for your help.
Wade McLaughlin
DMI
450 Lexington St.
Newton, MA 02466
p 617-527-1525 x103
f 617-527-6606
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20020930/28bc0838/attachment-0002.htm>
More information about the Bldg-sim
mailing list