[bldg-sim] Pump location

Jeff Haberl jhaberl at esl.tamu.edu
Wed Dec 17 16:46:08 PST 2003


Hello:
 
We've got data on lots of pumps...including the REJ building, where the
whole physical plant was put up 2 stories in the air to reduce pumping
power, and the cooling towers placed directly on top of the plant to further
reduce pumping energy, or at least this was the design intent.
 
Jeff
 


8=!   8=)  :=)   8=)   ;=)   8=)   8=(   8=)   8=()   8=)   8=|   8=)   :=')
8=)   8=)   8=? 

Jeff S. Haberl, Ph.D., P.E.............................jhaberl at esl.tamu.edu 
Professor...............................................Office Ph:
979-845-6507 
Department of Architecture...........................Lab Ph: 979-845-6065 
Energy Systems Laboratory...........................FAX: 979-862-2457 
Texas A&M University..................................77843-3581 
College Station, Texas, USA...........................URL: www-esl.tamu.edu 

8=/   8=)  :=)   8=)  ;=)   8=)   8=()   8=)   :=)   8=)   8=!   8=)   8=?
8=)   8=)   8=0   

-----Original Message-----
From: postman at gard.com [mailto:postman at gard.com]On Behalf Of Varkie Thomas
Sent: Wednesday, December 17, 2003 5:05 PM
To: bldg-sim at gard.com
Subject: [bldg-sim] Pump location



I am looking for information (articles, research papers, case studies) on
the effect of the location of the pump relative to a plate and frame heat
exchanger in a closed piping system.  Some of the issues are (1) the
vertical height of the piping system (1000' to 2000'), how high can you go,
(2) pumping thru HX, (3) pumping away from HX, (4) pump and HX located at
bottom of system, (5) pump and HX at top of system, and (6) pump start up.
What are the issues when the HX is replaced with other equipment such as
chillers and boilers?

 

Varkie Thomas

Skidmore, Owings & Merrill

312-360-4467

 



==================

You received this e-mail because you are subscribed 

to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 

from this mailing list send a blank message to 

BLDG-SIM-UNSUBSCRIBE at GARD.COM



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20031217/96bf32db/attachment-0002.htm>


More information about the Bldg-sim mailing list