[BLDG-SIM] Lightswitch Wizard: Daylighting Analysis Software for the Initial Design
Reinhart, Christoph
Christoph.Reinhart at nrc-cnrc.gc.ca
Tue Jun 3 10:59:19 PDT 2003
My apologies for any cross postings.<?xml:namespace prefix = o ns =
"urn:schemas-microsoft-com:office:office" />
Dear colleagues,
The National Research Council Canada and Natural Resources Canada have
released an online RADIANCE-based daylighting analysis tool called the
Lightswitch Wizard www.buildwiz.com <http://www.buildwiz.com> .
The tool has been developed to support daylighting-related design decisions
in commercial buildings during an early design stage. It offers a
comparative, reliable, and fast analysis of the amount of daylight available
in peripheral private offices as well as the lighting energy performance of
automated lighting controls (occupancy sensors, photocells) compared to
standard on/off switches. Blinds are either manually or automatically
controlled.
Simulation results are based on pre-calculated RADIANCE simulations which
are coupled with an empirical model that mimics manual lighting and blind
control in single offices. Further information is provided in the online
technical background, and glossary sections.
A simulation should take between 20 seconds and 3 minutes to run, assuming
moderate traffic on the server and a fast internet connection.
Your comments/suggestions are appreciated. Greetings from Ottawa,
Christoph
Christoph "Tito" Reinhart, Ph.D. tel: (613) 993-9703
Research Officer fax: (613) 954-3733
Institute for Research in Construction e-mail:
christoph.reinhart at nrc-cnrc.gc.ca
National Research Council Canada 1200 Montreal Road M-24, Ottawa
Ontario K1A 0R6 Canada
Daylighting Analysis Software:
The Lightswitch Wizard (initial design) www.buildwiz.com
<http://www.buildwiz.com/lightswitch/index.cfm>
DAYSIM (expert software)
http://irc.nrc-cnrc.gc.ca/ie/light/daysim.html
<http://irc.nrc-cnrc.gc.ca/ie/light/daysim.html>
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20030603/8f22ed38/attachment.htm>
More information about the Bldg-sim
mailing list