[BLDG-SIM] Energy modeling of an ice ring

Aulbach, John JAulbach at semprasolutions.com
Fri Mar 28 15:37:17 PST 2003


Hey, Jeff. I haven't tried it, but doesn't 2.1E TNG (The Next Generation)
have a refrigeration component that might be expanded to an ice rink?

Also, eQuest Version 3.0 (DOE-2.2) claims to now have the direct ability to
do ice rinks via the refrigeration system link.

-----Original Message-----
From: Jeff Haberl [mailto:jhaberl at esl.tamu.edu]
Sent: Friday, March 28, 2003 3:24 PM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] Energy modeling of an ice ring


Hello:

One can force DOE-2 into thinking there's a "cold" zone sandwiched in
between two
zones, with a bit of tinkering with UA's to counteract minimum zone temps.

That's what we did in the following paper:

Haberl, J., Claridge, D. 1985. "Retrofit Energy Studies of a Recreation
Center",  ASHRAE Transactions-Research, Volume 91, Part 2, pp.  1421 - 1433,
(June). 

Hopefully, some better methods are now available elsewhere that model
interior conditions, including radiation from the rink to surfaces inside
the
building...

Jeff

8=!   8=)  :=)   8=)   ;=)   8=)   8=(   8=)   8=()   8=)   8=|   8=)   :=')
8=)   8=)   8=?

Jeff S. Haberl, Ph.D., P.E.............................jhaberl at esl.tamu.edu
Associate Professor....................................Office Ph:
979-845-6507
Department of Architecture...........................Lab Ph: 979-845-6065
Energy Systems Laboratory...........................FAX: 979-862-2457
Texas A&M University..................................77843-3581
College Station, Texas, USA...........................URL: www-esl.tamu.edu

8=/   8=)  :=)   8=)  ;=)   8=)   8=()   8=)   :=)   8=)   8=!   8=)   8=?
8=)   8=)   8=0   



-----Original Message-----
From: postman at gard.com [mailto:postman at gard.com]On Behalf Of Kateri Heon
Sent: Friday, March 28, 2003 12:48 PM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] Energy modeling of an ice ring



Hi,

I am interested too in modeling ice ring with DOE-2.
Any information regarding ice ring modeling would be greatly appreciated.

Thanks
Kateri

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20030328/1bc7fd81/attachment-0002.htm>


More information about the Bldg-sim mailing list