[BLDG-SIM] natural ventilation analysis tools

[Brian Thornton]

Does anyone have experience with CFD, and non-CFD analysis tools for design
and energy analysis of natural ventilation?

Tas is one I have heard a lot about lately.

Can anyone describe their experience in learning, using, providing usable
and correct results, and extrapolating results to annual energy
usage/savings?

Any other software that provides at least some 2-D or 3-D CFD, and hourly
thermal calculations for natural ventilation?

Thanks,

Brian  

Brian Thornton, P.E.
Lead Engineer, Energy Services
GLUMAC
I N T E R N A T I O N A L
320 SW Washington, Suite 200
Portland, Oregon 97204

503.227.5280  Phone 
503.274.7674  Fax

www.Glumac.com

The information in this Internet e-mail is confidential and may be legally
privileged.  It is intended solely for the addressee.  Access to this email
by anyone else is unauthorized.  If you are not the intended recipient, any
disclosure, copying, distribution or any action taken in response to this
email is prohibited and may be unlawful.  Because e-mail can be altered
electronically, the integrity of this communication cannot be guaranteed.



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20031021/740efcd1/attachment.htm>