[BLDG-SIM] cad/modeling interface
Abushakra, Bass
abushakr at msoe.edu
Wed Oct 15 15:37:28 PDT 2003
You can try "Visual-DOE" available at www.eley.com <http://www.eley.com/> .
I haven't done it before, but I'll be doing it soon.
Bass Abushakra, Ph.D.
Assistant Professor, Building Environmental Systems
Architectural Engineering and Building Construction Department
Milwaukee School of Engineering
1025 N. Broadway, CC60-B
Milwaukee, WI 53202
Phone: 414-277-4551
Fax: 414-277-7415
http://people.msoe.edu/~abushakr/index.htm
-----Original Message-----
From: Alec Stevens [mailto:astevens at dmiinc.com]
Sent: Wednesday, October 15, 2003 3:04 PM
To: BLDG-SIM at GARD.COM
Subject: [BLDG-SIM] cad/modeling interface
General question for the list:
What is the latest progress and developments on the subject of integrating
architectural CAD drawings of building shell into hourly energy modeling
programs like DOE2 or EPlus?
Are there software interfaces out there that have gotten this down to a
usable product, or are we still a few years out?
What are the obstacles to implementing this? Any success stories that
people care to share? Any specific products that people have used?
Thanks!
Sincerely,
Alec Stevens, PE, LEED AP
DMI
450 Lexington St, Newton, MA 02466
p: 617-527-1525 x105 f: 617-527-6606
e: astevens at dmiinc.com <mailto:astevens at dmiinc.com>
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20031015/5c3881a1/attachment-0002.htm>
More information about the Bldg-sim
mailing list