[BLDG-SIM] PowerDOE

[Aulbach, John]

Fernando,
 
I suggest you upgrade to eQuest, which is affectionately called "Son of
PowerDOE". As I understand, because of usage of intellectual property,
PowerDOE is no longer support by anyone, but eQuest is. www.doe2.com
<http://www.doe2.com>  for instructions.

-----Original Message-----
From: Fernando Varela [mailto:fvarela at aula.eis.uva.es]
Sent: Friday, April 04, 2003 1:33 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] powerdoe


Dear members:
 
My name is Fernando, from Spain and I have several problems with powerdoe. 
 
One of them is that when I create report blocks and the corresponding
report, I don´t find them after in the list of available reports, so I
cannot see the results I´m looking for.
 
Other problem is that when I try to define the control schedule for the HVAC
system, (I use the Residential one) I don´t know where to do it, if in the
zone thermostat, in the cooling/heating control or in both of them.
 
Thank you very much.


=====================================================You received this
e-mail because you are subscribed 

to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 

from this mailing list send a blank message to 

BLDG-SIM-UNSUBSCRIBE at GARD.COM



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20030902/8640ef22/attachment.htm>