[BLDG-SIM] PV and WYEC files

[Gerald Pde]

Check http://rredc.nrel.gov/solar/calculators/PVWATTS/
Gerald
--- Vikram Sami <Vikram at ensargroup.com> wrote:

> Smita,
> Current versionsof eQUEST have PV options thn allow
> you to plug in manufacturers data for individual
> panels, and then set them up as an array. I dont
> think you can run the PV option independant of the
> building (i.e., you would probably need to build the
> rest of the building), but if you are just
> interested in PV, I would go through the wizard with
> a generic building, and then model the PV array in
> the detailed interface. I have used the PV option
> for a couple of projects, and it is fairly simple to
> model.
>  
> Hope this helps
>  
> Vikram Sami
> Ensar Group Inc.
> Boulder, CO 80304
> 
> 	-----Original Message----- 
> 	From: postman at gard.com on behalf of Smita Gupta 
> 	Sent: Fri 8/20/2004 12:24 PM 
> 	To: BLDG-SIM at GARD.COM 
> 	Cc: 
> 	Subject: [BLDG-SIM] PV and WYEC files
> 	
> 	
> 
> 	Hi,
> 	
> 	Where can I get detailed explaination of the fields
> of data in the WYEC files? Need the data to do some
> hand calcs for PV energy. Any other pointers and
> references regarding calculating PV performance will
> be helpful. Any software recommendations will be
> good too.
> 	
> 	Thanks,
> 	
> 	-Smita
> 	
> 	
> 	==================
> 	You received this e-mail because you are subscribed
> 	to the BLDG-SIM at GARD.COM mailing list.  To
> unsubscribe
> 	from this mailing list send a blank message to
> 	BLDG-SIM-UNSUBSCRIBE at GARD.COM
> 	
> 	
> 
> 



	
		
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.com/new_mail 

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM