[BLDG-SIM] eQuest modeling - Radiant Slab ---> Ground Source Heat Pump
Kajal Mehta
kajalm at gmail.com
Wed Dec 15 14:55:46 PST 2004
Hi all,
I am modeling a radiant slab system, in eQuest V 3.52, which is
getting heat from a ground source heat pump (GSHP).
The problem is:
1. For a GSHP, Ground loop heat exchanger can be modeled only in a
water loop heat pump (WLHP).
But, 2. eQuest crashes as soon as I let the Radiant slab system draw
heat from the WLHP, instead it creates a default Hot Water Loop. And,
hot water loop does not support a ground loop heat exchanger.
So is there any way of working around this problem? Please respond if
anybody has a solution or has faced a similar problem.
Thanks much!!
Kajal Mehta
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
More information about the Bldg-sim
mailing list