[BLDG-SIM] LEED Measurement and Verification Credit

[Jeff Haberl]

Hello:

 

I would suggest you look at Volume III of the IPMVP that shows M&V for
new construction, which requires calibrated simulation.

 

JEff

 

8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  8=()  8=)  8=|  8=)  :=')  8=)
8=)  8=?

Jeff S. Haberl, Ph.D.,
P.E.............................jhaberl at esl.tamu.edu

Professor......................................................Office
Ph: 979-845-6507

Department of Architecture.......................Lab Ph: 979-845-6065 

Energy Systems Laboratory.......................FAX: 979-862-2457 

Texas A&M University..............................77843-3581

College Station, Texas, USA.......................URL: www-esl.tamu.edu

8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=)  :=)  8=)  8=!  8=)  8=?  8=)
8=)  8=0 

 

________________________________

From: postman at gard.com [mailto:postman at gard.com] On Behalf Of Pat Dolan
Sent: Tuesday, November 30, 2004 4:39 PM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] LEED Measurement and Verification Credit

 

Hopefully this is not straying too far away from simulation discussions,
but....

 

Is anyone familiar, or had any experience, with the USGBC's LEED Energy
and Atmosphere Measurement and Verification Credit?  I am aware that
there is much written out there about the IPMVP, but I was looking for
specific information from people who have done M&V work specifically to
achieve the LEED credit.  I am wondering if any US LEED projects have
actually obtained this credit besides the Chicago Center for Green
Technology and the Donald Bren School of Environmental Science &
Management.  I am going to give a presentation to the local USGBC
chapter on the credit and I wondered if any other Bldg-Sim listers have
experiences that I could refer to in my presentation.  Any information
on costs to meet the credit would be especially appreciated.

 

Patrick Dolan

Serena Sturm Architects, Ltd.

3351 Commercial Ave.

Northbrook, IL  60062

847-564-0370, ext. 24 voice

847-205-5089, fax

 

 
 
==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20041201/5218b6e5/attachment.htm>