[BLDG-SIM] steam

[Sheila Sagerer]

Fearghal,

In the Utility project tree, highlight the fuel meter FM1, right click, and
choose "create new fuel meter".  Then you can choose "Steam" as the type of
meter and enter your $/1000 lbs.  You will also have to change the meter
selection in the HVAC air-side systems and possibly at the zone levels
depending on your air-side system types.  I usually use the spreadsheets to
default the applicable meters.

Sheila Sagerer
Energy Engineer
Energy Opportunities, Inc
717-880-9069
Fax: 717-291-9497


-----Original Message-----
From: postman at gard.com [mailto:postman at gard.com]On Behalf Of Fearghal
O'Connor
Sent: Wednesday, July 21, 2004 9:41 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] steam


 Hi,
  I'm simulating a building in eQUEST that heats water
using steam imported from a nearby steam generator.
The steam is purchased at $9 per 1000lbs steam. Im
just wondering how I could use this in the simulation,
I've thought about customising the gas utiliy option
to account for the cost and use of steam but im not
sure how. Any advice would be appreciated,
    Yours sincerley,
           Fearghal O'Connor




__________________________________
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
http://advision.webevents.yahoo.com/yahoo/votelifeengine/

======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM





======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM