[BLDG-SIM] Masonry Anchors -- Plastic Ties
Smita Chandra
smita at swinter.com
Mon Nov 15 14:12:00 PST 2004
This question is regarding brick masonry facades for high-rise buildings
(more than 3 stories). I am looking for "plastic" ties/masonry anchors
for use in masonry facades to reduce the heat loss usually seen through the
steel ties. The ties will bind a 4" thick brick veneer facade to a 6"
thick CMU block backing. The assembly includes insulation (3") and an air
cavity (1") between the brick and block. I'd appreciate if you could let me
know of any manufacturers/suppliers of plastic ties that you may be
familiar with, even if they are based outside the US.
Thank you.
Sincerely,
Smita
Smita Chandra
Energy Analyst
M. Arch., LEED accredited professional
smita at swinter.com
Phone Extension 295
Steven Winter Associates, Inc.
50, Washington St
Norwalk, CT 06854
(203) 857-0200 (Phone)
(203) 852-0741 (Fax)
www.swinter.com
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20041115/7ab2afea/attachment.htm>
More information about the Bldg-sim
mailing list