[BLDG-SIM] Make-up air systems and heat recovery

[Tianzhen Hong]

Chris,

VisualDOE 4 which uses DOE-2.1E does have the capability to model DOAS +
heat recovery for FPFC systems.

Tianzhen


> -----Original Message-----
> From: postman at gard.com [mailto:postman at gard.com] 
> Sent: Thursday, August 25, 2005 1:02 AM
> To: BLDG-SIM at gard.com
> Subject: [BLDG-SIM] Digest (08/25/2005 03:01) (#2005-462)
> 
> 
> (#2005-462) - Topics this issue:
> 
>      1) Make-up air systems and heat recovery Equest, <cj at cr-jay.ca>
>      2) eQUEST Solar Hot Water, <geraldpde at yahoo.com>
> 
> ----------------------------------------------------------------------
> 
> 
> Date: Wed, 24 Aug 2005 10:29:46 -0400
> From: Chris Jones <cj at cr-jay.ca>
> Subject: Make-up air systems and heat recovery Equest
> 
> I am using DOE2.1E to model a typical four pipe fan coil 
> system.  Fresh air 
> is by a make-up air system ducted to near each fan coil.  
> Relief air is 
> exhausted through an enthalpy reclaim system coupled with the 
> fresh air 
> supply fan.  DOE2.1E does not model this arrangement.  Can I 
> do it with 
> Equest (DOE2.2) using the OA-FROM-SYSTEM facility.  Thanks 
> for your help.
> 
> 
> 
> 
> 
> 
> Chris Jones, P.Eng.
> 14 Oneida Avenue
> Toronto, ON M5J2E3
> Tel. 416 203-7465
> Fax. 416 946-1005 
> 
> 
> 
> 
> 
> 
> 
> 
> ------------------------------
> 
> 
> Date: Wed, 24 Aug 2005 08:51:49 -0700 (PDT)
> From: Gerald Pde <geraldpde at yahoo.com>
> Subject: eQUEST Solar Hot Water
> 
> Is there a why to model Solar hot water using eQUEST
> OR doe-2.1?
> Thanks,
> Gerald
> 
> 
> 		
> ____________________________________________________
> Start your day with Yahoo! - make it your home page 
> http://www.yahoo.com/r/hs 
>  
> 
> ------------------------------
> 
> End BLDG-SIM at gard.com Digest [08/25/2005 03:01]
> -----------------------------------------------
> 
> ======================================================
> You received this e-mail because you are subscribed 
> to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
> from this mailing list send a blank message to 
> BLDG-SIM-UNSUBSCRIBE at GARD.COM
> 
> 


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM