[bldg-sim] eQUEST: In metric

[Mike Tillou]

In Window 5 under the tools menu is an option for switching units.
Switch to IP before running the DOE report and you should be all set for
importing into eQuest.

 

Mike

 

Mike Tillou, PE

etc Group, Inc.

 

 

________________________________

From: bldg-sim at gard.com [mailto:bldg-sim at gard.com] On Behalf Of Martin
YIP
Sent: Wednesday, November 02, 2005 5:07 PM
To: bldg-sim at gard.com
Subject: [bldg-sim] eQUEST: In metric

 

Dear bldg-sim members,

 

I came across the same problem when I tried to import glazing system
from window 5.  The file created by window 5 is in SI unit.  Thus when
importing to eQuest, the results were not correct.  Can anyone give
suggestion on that?  Thank you for your attention.

 

Regards

 

Martin YIP

 

 

-----Original Message-----
From: bldg-sim at gard.com [mailto:bldg-sim at gard.com] On Behalf Of Vaibhav
Potnis
Sent: Thursday, November 03, 2005 1:38 AM
To: bldg-sim at gard.com
Subject: [bldg-sim] eQUEST: In metric

 

As far as I know eQuest is not available in metric yet.

Vaibhav Potnis 
Green Building Services, Inc.

Portland, OR

Contact - 503-467-4724
vaipotnis at hotmail.com

	
________________________________


	From: Gerald Pde <geraldpde at yahoo.com>
	Reply-To: geraldpde at yahoo.com
	To: <bldg-sim at gard.com>
	Subject: [bldg-sim] eQUEST: In metric
	Date: Wed, 2 Nov 2005 06:49:33 -0800 (PST)
	>Is there a way to change eQUEST into metric units? I
	>can see the options under project properties in the
	>detailed interface but the pull down menu is not
	>activated.
	>Thanks,
	>Gerald
	>
	>
	>
	>
	>__________________________________
	>Yahoo! Mail - PC Magazine Editors' Choice 2005
	>http://mail.yahoo.com
	>
	>======================================================
	>You received this e-mail because you are subscribed
	>to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
	>from this mailing list send a blank message to
	>BLDG-SIM-UNSUBSCRIBE at GARD.COM
	>

 
 
==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20051102/156702c7/attachment-0002.htm>