[bldg-sim] ground loop heat exchanger in eQUEST

Alpana Jain ajain at setty.com
Thu Sep 8 12:37:37 PDT 2005


Hi, 

 

I am trying to model a Ground loop heat exchanger using eQUEST.
Obviously, I am going wrong somewhere, because the energy use in the
building is going up by almost 20kbtu/sqft/yr as against a variable
volume system, which in reality should actually go down.

I am modeling the GLHX along with a fluid cooler. I notice that the vent
fan energy and cooling energy go up drastically although heating energy
is reduced to almost nil.

Has anyone any experience with modeling a ground source heat pump in
eQUEST? And can tell me where I might be going wrong?

 

Thanks

 

Regards

Alpana

 

________________________________

Alpana Jain Kapoor 

LEEDTM  A.P., Energy Analyst

Setty & Associates, Ltd.

10340 Democracy Lane, Suite 304

Fairfax, VA - 22030

 

Phone:

703-691-2115 ex: 19 (Work)

703-691-8084 (Fax)

 

Mail: ajain at setty.com <mailto:ajain at setty.com> 

Web: www.setty.com

________________________________

 



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20050908/0617606c/attachment.htm>


More information about the Bldg-sim mailing list