[BLDG-SIM] Equest windows

[Vikram Sami]

You can use the parametric simulation function to select a whole bunch
of windows and change the glass type. You can also set the global
parameters if you are using the simplified glass model to vary either
SC, VT or Uvalue parametrically.  (This is in the detailed interface).
 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design * Technological Expertise * Exceptional Service 
www.lordaecksargent.com 

 

________________________________

From: BLDG-SIM at GARD.COM [mailto:BLDG-SIM at GARD.COM] On Behalf Of Matt
Barker
Sent: Tuesday, August 08, 2006 12:57 PM
To: BLDG-SIM at GARD.COM
Subject: [BLDG-SIM] Equest windows



Hello everyone, 

Is it possible when working with numerous windows to globally specify
half of them one type and the other half another type? Or do you have to
do it one window at a time.  Thanks for the help.

Matt


==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060808/16d9a0e0/attachment-0002.htm>