[BLDG-SIM] GSHP and Stove modeling

[tim]

I will be using eQuest to model a complex of housing units and will be
examining two possible RE technologies for implementation: One is a ground
source heat pump (gshp) and the other is a wood pellet stove.

IF anyone has experience incorporating one or both of these systems into a
simulation any advice would be appreciated:

Specifically:
-Wood stove--what is the best way to represent a heat source like this?
-tips or tricks to avoid problems
-Validation of results

thanks a lot

tim


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20061221/9d6f9195/attachment.htm>