[BLDG-SIM] eQUEST v3.6 Report issues

Aulbach, John jaulbach at nexant.com
Fri Dec 1 12:05:08 PST 2006


Are the reports in the .INP file being called out?

________________________________

From: Vikram Sami [mailto:VSami at lasarchitect.com] 
Sent: Friday, December 01, 2006 12:02 PM
To: Aulbach, John; BLDG-SIM at GARD.COM
Subject: RE: [BLDG-SIM] eQUEST v3.6 Report issues


I'm able to open the SIM file, and the BEPS & BEPU reports seem to be in
order. I'm just curious about the reports in eQUEST though. 
 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design * Technological Expertise * Exceptional Service 
www.lordaecksargent.com 

 

________________________________

From: Aulbach, John [mailto:jaulbach at nexant.com] 
Sent: Friday, December 01, 2006 2:58 PM
To: Vikram Sami; BLDG-SIM at GARD.COM
Subject: RE: [BLDG-SIM] eQUEST v3.6 Report issues


Are you sure there isn't a run error within the simulation itself? There
should be a .SIM file you can view through the "back door", and see if
something didn't compute.I have had similar situation, and a run error
within the simulation didn't spit out into the eQuest interface. Not all
errors show up in eQuest.

________________________________

From: BLDG-SIM at GARD.COM [mailto:BLDG-SIM at GARD.COM] On Behalf Of Vikram
Sami
Sent: Friday, December 01, 2006 11:25 AM
To: BLDG-SIM at GARD.COM
Subject: [BLDG-SIM] eQUEST v3.6 Report issues



I recently downloaded eQUEST v3.6 build 5200, and after running a
simulation on it, I am unable to review any of the simulation results in
eQUEST (the eQUEST post simulation reports all show up blank). 

Has anyone else has had similar problems? If so - is there a fix and
what is it? 

Thanks 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design * Technological Expertise * Exceptional Service 
www.lordaecksargent.com <file://www.lordaecksargent.com>  


==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20061201/37dfbde5/attachment-0002.htm>


More information about the Bldg-sim mailing list