[bldg-sim] Green building Studio + Autodesk Building System

[Yury Lui]

Hi there, I have a question regarding to converting GBXML from ABS to
GBS. GBS keep giving me error messages such as "Surface id= su13_Floor,
an InteriorFloor, should have two spaces adjacent to it. It has 1
defined." As such, I constructed a test run with only 1 espace on first
level and 1 espace on second level. The second level espace is perfectly
line up above the first level espace. The error message remains with the
second level spaces' floor type set to "Interior Space." The error
message only goes away when the floor type is changed to "Raised Floor."
However, I thought "raised floor" is referring to under floor
distribution. Does Autodesk has different terminology? Is it the right
setting for slab to slab construction?  If not, what other possibility
for the error?

 

Also, from my other test run, I found out that if the space has partial
roof, it needs to be separated by two espaces.

 

Many thanks!!!!!

 

Yury Lui

 



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060210/ae018042/attachment.htm>