[BLDG-SIM] Re-pathing a CAD background

[Scott Runyon]

So is there anyway to detach it once I've completed my model using
detailed edit mode?

 

If I switch back to wizard, then all of that work in the detailed edit
mode will be lost...and I don't want that!

 

Scott Runyon

Design Engineer

RMF Engineering, Inc.

 

 

________________________________

From: BLDG-SIM at GARD.COM [mailto:BLDG-SIM at GARD.COM] On Behalf Of Scott
Runyon
Sent: Friday, February 17, 2006 9:40 AM
To: BLDG-SIM at GARD.COM
Subject: [BLDG-SIM] Re-pathing a CAD background

 

I made my eQUEST model using CAD backgrounds and saved it on my
computer.

 

I copied the folders (model and backgrounds) to the network drive. I can
get the model to come up, but it prompts me to browse for the cad file.
I found it's new location for each background, and the model ran fine.

 

However, when I come back into it, eQUEST once again asked for the
location of the CAD background files. 

 

 

What can I do to get it to recognize where the backgrounds are located
every time I start the program up?

 

 

Also, how do I purge/erase the result file listings for all the projects
I've worked on in the left column every time I view a new simulation's
results? 

 

Thanks.

-Scott Runyon

 

 

 

 

 
 
==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060217/813c3308/attachment-0002.htm>