[bldg-sim] Humidity control in eQUEST

[Vikram Sami]

I am trying to model a humidistat in eQUEST using a packaged single zone system (for a project in Atlanta), and for some reason, it doesn't seem to be adding energy for reducing max humidity from 100% to 50%. The result is that there is a cooling penalty for using a liquid desiccant dehumidifier. My question is:

A) Is it possible to have humidity controls for a PSZ system type? If so - how do I do it?
B) If not - what system type should I use, and how do I get it to dehumidify?

Thanks in advance.

Vikram Sami,  LEED AP 
Direct Phone 404-253-1466 | Direct Fax  404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design * Technological Expertise * Exceptional Service 
www.lordaecksargent.com 




===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060123/2a7f3ca9/attachment.htm>