[bldg-sim] help- error message

[Mike Roberts]

There are some possible errors in DOE-2x that BDL does not catch.  Usually
you can find an error message at the end of the .SIM file.  In this case, it
will probably be after the LV-x and LS-x reports.  Hopefully, it will tell
you what you need to correct the problem.

Mike Roberts
  -----Original Message-----
  From: bldg-sim at gard.com [mailto:bldg-sim at gard.com]On Behalf Of nicole chen
  Sent: Tuesday, January 03, 2006 8:32 AM
  To: bldg-sim at gard.com
  Subject: [bldg-sim] help- error message


  Dear all

  I have revised the input file of a project created before.BDL load file
progamme does no find any errors, but when performing simulation , the
program is ended at the stage of producing summary and verification reports
. " Run terminated by error(s) " is shown. So only load calculation is
performed. I never encounter such a program. And I cannot find error message
in BDL file. so I have no idea , what error cause termination of run(s).
does any of you have such a problem before, can you give me some
instruction. By the way , I am using Equest.

  --
  Yours
  Nicole Chen


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060103/08af5cec/attachment-0002.htm>