[bldg-sim] modifying TMY2 weather file in BIN format
Ramana Koti
ramana.koti at gmail.com
Fri May 26 22:58:37 PDT 2006
Hello all,
I need to modify the direct normal and total horizontal solar values in the
BIN format TMY2 weather file used by DOE-2/eQUEST to ensure both DAYSIM and
DOE-2 provide the same exterior horizontal illuminance. Any pointers on how
this can be done or an alternative approach will be appreciated.
Regards,
Ramana.
--
Venkata Ramana Koti
MS in Building Design (Energy/Climate)
School of Architecture and Landscape Architecture
College of Design
Arizona State University, Tempe AZ 85287
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060526/0e338c82/attachment.htm>
More information about the Bldg-sim
mailing list