[BLDG-SIM] Humidity value in hourly report
Mike Tillou
miket at etcgrp.com
Mon Apr 16 12:58:16 PDT 2007
In the simulation output file (.SIM) you will find Zone relative
humidity reported in the SS-N report. There is a single report for each
zone.
Mike
Michael Tillou, PE
ETC Group - Energy Engineering for a Sustainable Future
Ph:413-458-9870
-----Original Message-----
From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of
Shena Turlington
Sent: Monday, April 16, 2007 3:33 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] Humidity value in hourly report
Dear all
I am trying to compare models in eQuest and check how well the
humidity is being controlled in the zones. I entered the humidity
control under the system, "MAX-HUMIDITY = 50". When I print out the
hourly reports the return humidity always shows up as zero. Am I
missing something? Has anyone else ever had this problem?
Thanks for the help,
Shena Turlington
ESD Engineer
MEP Sydney
Arup
Level 10, 201 Kent St, Sydney 2000
PO Box 76, Millers Point 2000
T +61 (0)2 9320 9573
____________________________________________________________
Electronic mail messages entering and leaving Arup business
systems are scanned for acceptability of content and viruses
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070416/86a850b8/attachment-0002.htm>
More information about the Bldg-sim
mailing list