[BLDG-SIM] Suggestions on how to model double-skin facade with eQuest

[Garcia, Robert]

Ying,

Below are a few links that demonstrate how to approach an analysis of a
DSF in eQuest.  Although these resources are not too detailed, they
provide a good place to start. I will also be investigating a DSF
through an energy model in eQuest and through CFD simulations in Airpak.
If anyone has developed techniques for modeling the benefits of a DSF in
eQuest that would be extremely helpful.

http://www.ibpsa.org/proceedings/BS2005/BS05_0831_838.pdf

http://www.solar2006.org/presentations/tech_sessions/t45-p165.pdf

http://www.solar2006.org/presentations/tech_sessions/t45-p201.pdf

Go TECH!

Robert Garcia
AKF Engineers, LLP
1500 Walnut Street, Suite 1400
Philadelphia, PA 19102 
Phone:   (215) 282-2182
Fax:        (215) 735-6706
www.akf-engineers.com


-----Original Message-----
From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of
yizhao1 at vt.edu
Sent: Wednesday, August 22, 2007 5:48 PM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] Suggestions on how to model double-skin facade with
eQuest


Hi all,
We'll model a highrise office building with double skin glass facades.
Any suggestions or experience would you share about modeling it?

Many thanks!

Ying



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM