[Bldg-sim] Changing System Assignments in eQuest

Aulbach, John jaulbach at nexant.com
Tue Dec 18 16:18:00 PST 2007


Eric:

I don't believe you can Parametrically. You would need to copy the file
into EEM Run 1, then change the zoning.

Would be a nice feature to have.

John R. Aulbach, PE, CEM
Project Manager
Nexant, Inc.
100 North Barranca, Suite 820
West Covina, CA 91791 USA
Phone: 626-430-9054
Fax: 626-430-9060
email: jaulbach at nexant.com
 
 

-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Eric Shadd
Sent: Tuesday, December 18, 2007 4:12 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Changing System Assignments in eQuest

Is there a way to change which zone a system serves in "Parametric
Runs"?  Specifically, I want a run with 4 systems, each covering 5 of
the 20 zones, then a run with 2 systems, each covering 10 of 20 zones,
then 1 system for all 20 zones.
 
TIA,
Eric
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachme
nts/20071218/f33c0529/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Header
Type: application/octet-stream
Size: 1506 bytes
Desc: not available
Url :
http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachme
nts/20071218/f33c0529/attachment.obj
_______________________________________________
Bldg-sim mailing list
Bldg-sim at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org




More information about the Bldg-sim mailing list