[bldg-sim] PVVT Sytems with zone voting control

[Allison Rutter]

Hi all,

 

Has anyone used eQUEST to model a PVVT system with zone voting control?  It
seems that I am only able to specify a control zone, and have all other
zones be "proportionate to the airflow of the control zone", whose
thermostats have no effect on the operation of the supply
airflow/temperature.  Is there a way in which I can simulate the intended
system by specifying another system type in eQUEST, or by specifying a
cooling/heating availability schedule?  Any help would be appreciated.

 

Thank you,

 

Allison Rutter

Mechanical Engineer, LEED AP 

STAENGL ENGINEERING

300 W. Main St. Suite 302

Charlottesville, VA 22903

Ph:   (434) 295-8105

Fax: (866) 810-2879

www.staenglengineering.com

 



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070117/2c4d3139/attachment.htm>