[BLDG-SIM] eQuest Warning Message Resource

Steven Gates steve.gates at doe2.com
Fri Jun 15 10:36:36 PDT 2007


Ignore this message.  We will be taking this message out in a future
release...

 

Steve Gates

 

  _____  

From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of Brett Krug,
PE
Sent: Friday, June 15, 2007 8:00 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] eQuest Warning Message Resource

 

I am more of a novice at building energy simulation.  I have been using
eQuest for about 1.5 years.  Is anyone aware of a resource/file, etc. with
information about Warning messages, and how to troubleshoot them.  I have
the warning indicated below, and I cannot figure out how to resolve it.  Any
thoughts?

 

 

**WARNING*******************************************************************
***

 

Zone: EL1 SSW Perim Zn (G.SSW2) could not successfully allocate all
equipment energy to the 5-minute bins because of an equipment overload.  The
peak load used in ECONOMICS will not include the fraction due to the
overload, but the PLANT reports will. Mon/Day/Hour:  1  2  8  Energy:  20.1
Unallocated: 1.693

 

 

 

Brett W. Krug, PE

 
 
==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070615/f7c34d2f/attachment-0008.htm>


More information about the Bldg-sim mailing list