[BLDG-SIM] converting Visual DOE to eQuest
Mike Tillou
miket at etcgrp.com
Fri Mar 2 08:05:27 PST 2007
Alec,
http://www.doe2.com/Download/Docs/cnvrt21e.pdf
The DOE2 website has a document that explains the differrences between
DOE2.1e and DOE2.2.
Mike
Michael Tillou, PE
ETC Group - Energy Engineering for a Sustainable Future
Ph:413-458-9870
-----Original Message-----
From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of
Alec Stevens
Sent: Thursday, March 01, 2007 5:18 PM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] converting Visual DOE to eQuest
Hi,
Sorry if this question may have already been covered in the
past, but I was wondering if there is a straightforward way to convert
Visual DOE files to run in eQuest, or at the least to grab the building
geometry out of the Visual DOE input file and have it translate into
eQuest. A brief look at the Visual DOE input file indicated that it was
based on DOE 2.1E and not 2.2.
Any suggestions are appreciated.
Sincerely,
Alec Stevens, PE, LEED AP
DMI
450 Lexington St., Newton, MA 02466
p: 617-527-1525 x105 f: 617-527-6606
e: astevens at dmiinc.com
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070302/1243d85e/attachment-0002.htm>
More information about the Bldg-sim
mailing list