[BLDG-SIM] D2SimViewer out of memory
Brad Acker
backer at uidaho.edu
Wed May 2 16:41:48 PDT 2007
Please find my specifics about this problem below.
----- Original Message -----
From: Scott Criswell <Scott.Criswell at doe2.com>
Date: Wednesday, May 2, 2007 4:20 pm
Subject: Re: [BLDG-SIM] D2SimViewer out of memory
To: backer at uidaho.edu
> There is no "cut" option in D2SimViewer. I assume you meant "copy".
CORRECT.
>
> Please respond to the following questions so that we can try to
> isolate
> the issue -
> - At what point exactly does the error occur? I am guessing that
> it
> occurs immediately after you either press <ctrl>-c or press the
> "copy"
> toolbar button.
YES-immediately after USING USING CTRL-C OR THE COPY BUTTON
> - How did you activate the copy function, via keyword or toolbar
> button? And did you try both and get the same error?
YES, BOTH WITH SAME RESULT
> - Are you working across multiple systems, such as running
> D2SimViewer
> on another computer you are linked to via Remote Access or perhaps
> accessing a .SIM file or an Excel spreadsheet located on a network
> machine? If so, what are the operating systems being run on
> each machine?
NO-RUNNING OFF MY MACHINE WITH ALL FILES LOCAL
> - Are you copying a large amount of data and/or are running on a
> machine
> with limited RAM and/or hard-drive space?
NO- JUST TRYING TO COPY THE ZONE NAME
> - Have you experienced anything along these lines w/ other
> software on
> this same machine?
NO
> - Have you been able to copy data out of D2SimViewer on this
> machine
> previously? If so, any difference between then and now (available
> memory, system resources, hardware/software updates, etc.)?
THIS HAS WORKED IN THE PAST, TO MY KNOWLEDGE NOTHING HAS CHANGED
>
> - Scott
>
> Brad Acker wrote:
> > I'm in the D2Sim Viewer (from eQuest) and I want to cut and
> paste to a
> > spreadsheet. When I try to cut a window comes up that tells
> > me "D2Simviewer out of memory". Any work arounds for this?
> >
> > Thanks, Brad
> >
> > ======================================================
> > You received this e-mail because you are subscribed
> > to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
> > from this mailing list send a blank message to
> > BLDG-SIM-UNSUBSCRIBE at GARD.COM
> >
> >
> >
>
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
More information about the Bldg-sim
mailing list