[BLDG-SIM] Doe2.2 - Ice Rink Scheduling

Kevin Kyte kkyte at robsonwoese.com
Fri Nov 30 09:29:48 PST 2007


I am modeling an ice sheet in a convention center to be used for special
events.  How does one go about scheduling when the ice sheet is to be used
and when not.  In doe-2 documentation, the only schedule I see that may help
is RINK-SETPT-SCH.  This may useful if it was of type ON/OFF/TEMP, but it is
not.  Also there is no schedule for subfloor heating so when would I know
that that is working?

 

So for RINK-SETPT-SCH I use 5deg when I want ice and 50deg when no ice.
Does this mean that subfloor heating continuously runs while setpoint is at
50deg?  Several months out of the year the ice sheet will not be used.
Should scheduling this be done on the zone or equip used?  How does one get
through this scheduling problem?

 

 

 

 

 

 

 

 

  

 

 

 

Kevin Kyte, LEED AP

Jr. Mechanical Engineer

RobsonWoese, Inc.

T:  716-636-1800

F:  716-636-1856

 



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20071130/cb14dff3/attachment.htm>


More information about the Bldg-sim mailing list