[BLDG-SIM] cooling coil error in eQuest

Lori Bokovoy LBokovoy at glumac.com
Wed Nov 21 09:18:47 PST 2007


I have a hydronic cooling coil with EWT of 42 and LWT of 52. My EAT is 80 and my LAT is 45. In eQuest it is set up where the cooling coil LAT must be at least 6F higher than the EWT. My delta T is only 3F and therefore I am getting an error in eQuest telling me that the delta T must be 6F or greater. Has anyone run into this problem and know how to fix it.

This is the error I have been getting in eQuest: 

 In Support System , cooling coil leaving temperature must be at least 6F higher than entering water temp.


Thanks,

Lori Bokovoy 



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20071121/c237c201/attachment.htm>


More information about the Bldg-sim mailing list