[BLDG-SIM] eQuest MAU for kitchen

Alan Jackson Alan.Jackson at burohappold.com
Thu Nov 15 06:30:06 PST 2007


Hello

 

I am simulating a small indoor food court area with an open kitchen and
food prep area in the center surrounded by seating areas. I plan to
introduce 100% OA to the space with a makeup air unit providing cooling
and OA tempering, heating using perimeter fin-tube. I am unclear on how
to simulate a 100% OA unit in eQuest.  Can anyone provide some guidance?

 

Regards,

 

Alan Jackson, LEED(r) A.P. 
Senior Mechanical Engineer
Buro Happold Consulting Engineers, PC
100 Broadway 
New York, NY 10005
USA

 

Tel: (+1) 212 334 2025

Direct: (+1) 212 616 0267

Fax: (+1) 212 334 5528

Email: alan.jackson at burohappold.com
www.burohappold.com <http://www.burohappold.com/> 

This transmission is confidential and intended solely for the person or
organization to whom it is correctly addressed. If you are not the
intended recipient of this transmission, you should not take any action
in reliance on it. Further, this transmission may contain confidential
design and other information owned by Buro Happold Consulting Engineers
PC. You should not copy, distribute, use, offer for sale or hire such
information or in any way infringe the design and intellectual property
rights of Buro Happold Consulting Engineers PC. It is intended that
communication by email from Buro Happold Consulting Engineers PC or its
employees is limited to communications connected to the services
provided by Buro Happold Consulting Engineers PC. Buro Happold
Consulting Engineers PC accepts no liability for any communications not
connected to the services it provides. Computer viruses may be
transmitted or downloaded onto your computer system via email
communication. It is the recipient's responsibility to take any action
necessary to prevent computer viruses being transmitted in this way.
Accordingly, Buro Happold Consulting Engineers PC disclaims all
responsibility which arises directly or indirectly from such
transmission of computer viruses.

 

 



This message has been scanned by MailController - www.MailController.altohiway.com


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20071115/d2e6aa1c/attachment.htm>


More information about the Bldg-sim mailing list