[BLDG-SIM] eQuest atrium modelling
David S Eldridge
DSE at grummanbutkus.com
Mon Nov 5 15:22:52 PST 2007
You can override the calculated default volume entry with a value from a
"manual" calc.
David
> -----Original Message-----
> From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of Justin
Wong
> Sent: Monday, November 05, 2007 4:42 PM
> To: BLDG-SIM at gard.com
> Subject: [BLDG-SIM] eQuest atrium modelling
>
> John,
>
> The space adjacent to these wall has the correct volume? space
> definition is area polygon times a constant height right?
>
> Correct me if I am wrong here.
>
> Justin
>
> Aulbach, John wrote:
> > Justin:
> >
> > Is this an atrium that has outside walls as part of its
construction?
> > You can ALWAYS tilts surfaces in +- vertical directions, with 0Deg =
> > face down, 90 Deg = vertical wall, and 180 Deg being a roof. So tilt
> > your walls and make your roof larger than your floor. And any
windows in
> > those walls should have the same tilt as the walls automatically.
> >
> > I see no reason why this won't work.
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
More information about the Bldg-sim
mailing list