[BLDG-SIM] After making custom window/door layout- should wizard door couldnt and window % auto update?
Ryan Lacey
ryan at petersenengineering.com
Thu Sep 13 07:49:11 PDT 2007
Hello All,
After I add doors and windows in the custom door/window placement feature in
the DD wizzard, the door # /façade and window % per façade to not reflect
the changes made in the custom door/window placement. Does anyone know what
is going on? Ex. In the custom door/window placement interfaceI add 3 doors
to the east façade. Once I leave the custom door/window placement interface
and go back to the standard wizard door placement page it only shows the
default 1 door after I just finished drawing 3. Similarry with the window
%, If I add windows in the custom interface and then go back to the enter %
by façade page in the wizzard, the % are still the same after making the
custom changes.
Any help would be greatly appriciated. I dont know if this is normal or a
disaster that needs fixing.
Thank you,
Ryan
Ryan Lacey
Petersen Engineering, Inc.
PO Box 4774
6 Market Square
Portsmouth, NH 03801
603 426-4233 phone
603 436-4294 fax
ryan at petersenengineering.com
www.petersenengineering.com
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070913/1c57dfa5/attachment.htm>
More information about the Bldg-sim
mailing list