[BLDG-SIM] Question about Inputting COP and SEER values in Detailed Data Edit Mode

[Redekopp, Matthew]

Jeremy
 
I don't know if this has been answered but anything entered in the wizard can be changed in detailed edit mode, you just have to find it. Better than relying on the GUI you can delve into the inp file with a text editor and find the COP/SEER manually to make the change. 
 
Matthew
Matthew Redekopp, EIT, LEED AP
Sustainable Building Analyst
Stantec
1100 - 111 Dunsmuir Street
Vancouver BC V6B 6A3
Ph: (604) 696-8386
Fx: (604) 696-8100
mredekopp at stantec.com 
stantec.com <http://www.stantec.com/>  
 
The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.
 
ü Please consider the environment before printing this email.

________________________________

From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of Jeremy Plitt
Sent: Tuesday, September 11, 2007 6:25 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] Question about Inputting COP and SEER values in Detailed Data Edit Mode



I was wondering if anyone knew how to input COP and SEER values in the Detailed Data Edit Mode? I am comparing design variations for a building and am just changing the values from the first file rather than inputting everything all over again in a new file. Can I change the COP and SEER values in the Detailed Data Edit Mode or do I have to go back to the Building Creation Wizard to accomplish this? 

 

Thanks,

 

Jeremy Plitt

Mechanical Engineer

 

Setty & Associates, Ltd.

3040 Williams Drive Suite 600

Fairfax, VA 22031-4618

PH: 703-691-2115 Ext. 123

FX: 703-691-8084

 


==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070921/de98e6f0/attachment-0002.htm>