[Bldg-sim] LEED category

[Matthew Higgins]

Our office is working on a job similar to this. For the existing 
building we are retrofitting and adjacent to the retrofit is the new 
construction of the same size. For our purposes LEED-EB made the most 
sense for the existing structure and LEED-NC is being used for the new 
construction. The USGBC allows this and may also provide insight for you 
and your specific site/context.

Good Luck.

Matthew Higgins, LEED AP
Technical Specialist
Environmental Dynamics, Inc.
Architecture and Sustainability Consulting Services
505.242.2851

Any data provided by the Consultant, verbal or written, are to be considered opinions of building energy and/or daylight performance. The Client understands that the Consultant has no control of occupant habits, equipment or material performance or characteristics, site or climate conditions or the Contractor's method of assembly, and that the Consultant's opinions regarding building energy/daylight performance are made on the basis of the Consultant's professional judgment and experience. The Consultant makes no warranty, express or implied, that the energy/daylight performance of the building will not vary from the Consultant's opinion of building energy/daylight performance.



KRISHNAJI PAWAR wrote:

> Hello friends
>
> I m working on a project for LEED and I have some problems regarding 
> to this
>
> On the site there is already one office building and few parking areas
>
> Now the client wants to build two new building on same plot
>
> One is new office building which is actually not a new building but a 
> part of existing office building
>
> They are extending old office building and one is totally new 
> warehouse which is unconditional and nothing inside they are just 
> using for storing purpose
>
> So in short one new office building which is a part of existing office 
> building and one new warehouse on same plot
>
> The question is in which LEED category this project falls and how to 
> do energy modeling
>
> Is it LEED NC, LEED core and shell or LEED for existing Building?
>
> Regards,
> KRISHNAJI PAWAR
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Bldg-sim mailing list
>http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>  
>