[Bldg-sim] model mezzine and differnet plans

Mona A mona.azarba at gmail.com
Fri Aug 8 12:45:37 PDT 2008


Hi,

I would like to model a 26storey   existing building with EQuest, however
the plans  are in pdf format, and I am not sure if I need to redraw them in
autocad.  the first two floors has different shape and part of the 2nd
floor is connected to 1st floor as a 2 storey gallery and there are 2
parking under ground(under first floor). I am wondering if I should model
the whole building in the schematic design without the first 2 floors and
parkings and then add them to the building?
Building is rectangular in shape and the 24 story is expanded over the first
2 floor.

How can I model the 2 connected story? and how can I put these 2 stories
under the whole building.

Thanks alot,
Mona A.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080808/6b89809d/attachment.htm>


More information about the Bldg-sim mailing list