[Bldg-sim] eQUEST Crashing

[Brian Fountain]

I had a file like that once. I cannot recall the issue with the file but 
I think it was resolved by starting with a new blank file and importing 
the .inp file. Hope this works!

Tim Meeker wrote:
>
> Hello All,
>
> Long time list subscriber…first time author.
>
> I’m having difficulty with a model that I have just constructed. 
> Unfortunately when I perform a simulation, the simulation aborts and 
> the program crashes when I get to roughly 18% of simulation 
> complete…or when it starts to Simulate HVAC Equipment. I get 
> completely booted out of the file. There is no documentation (that I 
> can see) on what is causing the crash.
>
> There appears to be no BDL errors…and further examination of the 
> simulation files does not reveal any readily apparent issues.
>
> I don’t have much information…but any help or suggestions are appreciated.
>
> Thanks!!
>
> Tim
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Bldg-sim mailing list
> Bldg-sim at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>   
> ------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition. 
> Version: 7.5.516 / Virus Database: 269.19.19/1256 - Release Date: 2/2/2008 1:50 PM
>