[Bldg-sim] How to define elevators in Equest?

Andrew Craig andrew_c at ieice.com
Wed Feb 20 23:20:45 PST 2008


Jessi---

The best way to do this is to input the elevator electrical load as an interior load in the Utilty and Economics tab of the Detailed Edit mode of eQUEST.  Under this tab, double click on the electric meter, probably labeled EM1.  In this screen, click on the Direct Loads tab and input your elevators under the Interior Direct Loads table.  After entering a kW rating for your elevator (most likely the BHP of the elevator motor), it will prompt you to input a schedule.  eQUEST has several library elevator schedules that can be accessed by choosing "library" in the schedule pull-down menu.  Good luck and let me know if you have any trouble.

Happy modeling,
Andrew


-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org on behalf of Jessica XP
Sent: Wed 2/20/2008 9:41 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] How to define elevators in Equest?
 
Dear folks,
      I am new to this forum. I am simulating a LEED certified project, and
just wondering how to define elevators and separately output their energy
use in Equest. thank you.

Jessi

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080220/489850cb/attachment-0002.htm>


More information about the Bldg-sim mailing list