[Bldg-sim] Revit gbXML to IES

[Brain, Joshua]

I would also like to know anyone's resolution to this issue.

 

Thanks,

Josh

 

Joshua Brain

Mechanical Group 

R.G. Vanderweil Engineers, LLP 

274 Summer Street     Boston, MA  02210 

Tel: (617) 423-7423 

Fax: (617) 423-7401 

Direct: (617) 956-4565 

 

www.vanderweil.com 

 

 

________________________________

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Ramana Koti
Sent: Wednesday, January 16, 2008 3:48 PM
To: BLDG-SIM at onebuilding.org
Cc: RCamp at bnim.com
Subject: [Bldg-sim] Revit gbXML to IES

 

Dear all,

We're hitting a few snags when importing a gbXML from a large Revit
model into IES with respect to the following issues:

*	Bringing all missing surface areas down to zero (during model
checking) 
*	Bringing sunshades (on curtain walls) with horizontal
cylindrical tubes in them in. Vertical fin sunshades on punched openings
are importing fine.
*	Bringing all curtain wall glazing in as transparent panels. We
checked over and over to make sure all panels within the curtain wall
are of the same type, some come in as transparent, some come in as
opaque. 

If anyone has dealt with and overcome these issues, pointers are highly
appreciated.

Thanks,

Ramana Koti, LEED AP
Sustainable Building Analyst

ELEMENTS division of BNIM architects
106 W. 14th Street Suite 200 
Kansas City, Missouri 64105

p 816.783.1635 f 816.783.1501
www.bnim.com| elements.bnim.com

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080116/1d249373/attachment-0002.htm>