[Bldg-sim] Exterior Light Tresspass simulation using DIALux

[Prabhat Barnwal]

Dear all,

I am modeling an exterior lighitng arrangement using DIALux. As per LEED SS Cr8, there is an upper limit on horizontal and verticle footcandles on site boundary as well as x feet beyond the boundary.

I need to create a calculation grid to measure site illumination at ground plane ,verticle calculation grid at site boundary and at the extents of light zone requirement. 
Normal calculation surface way is not help full in creating a verticle grid at property boundary.

Does anyone know how to simulate it in DIALux?


Regards,
Prabhat Barnwal
Kalpakrit Sustainable Environments Pvt. Ltd.
610-A, Udyog Vihar, Phase V, Gurgaon 122016, Haryana, India
Tel: +91.124.4309490-92 Fax: +91.124.4309493
Cell: +91.9971731794
E-mail : prabhat at kalpakrit.com
Disclaimer: The information contained in this message is confidential and may be legally privileged. The message is intended solely for the addressee(s). If you are not the intended recipient, you are hereby notified that any use, dissemination, or reproduction is strictly prohibited and may be unlawful. If you are not the intended recipient, please contact the sender by return e-mail and destroy all copies of the original message
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080303/8350dc16/attachment.htm>