[Bldg-sim] FW: e-quest-simulation error
Christopher Sturdivant
csturdiv at rmf.com
Tue Mar 25 05:07:23 PDT 2008
________________________________
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Christopher
Sturdivant
Sent: Monday, March 24, 2008 11:55 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] e-quest-simulation error
Greetings,
I am attempting to run a simulation based on the building's performance
but every time that the simulation runs an error message pops up and
cancels the simulation. The error message is "cooling coil leaving
temperature must be at least 6F higher than entering water temperature."
I am not sure where in the program, equest, where you can manually enter
the value for entering and leaving water temperature across a cooling
coil.
Thanks!
Christopher Sturdivant
Design Engineer-Mechanical
RMF Engineering, Inc.
Ph: 843-971-9639 ext. 110
Fax: 843-971-9641
csturdiv at rmf.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080325/2d45828e/attachment.htm>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ATT746015.txt
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080325/2d45828e/attachment.txt>
More information about the Bldg-sim
mailing list