[Bldg-sim] Equest 3.6 simulation bug

Shank, Kurt KMS at BRPLUSA.COM
Fri Mar 14 07:52:11 PDT 2008


Brian,
I tried the .inp import technique.....unfortunately, I have the same
freezing issue.  Any other possibilities? 

-----Original Message-----
From: Brian Fountain [mailto:bfountain at greensim.com] 
Sent: Friday, March 07, 2008 2:57 PM
To: Shank, Kurt
Cc: bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] Equest 3.6 simulation bug

I had a similar problem some time ago.  The issue was resolved with
minimum data loss by opening a new, blank file and then importing the
.inp file from the original.  I lost my Wizard data but was beyond that
in the project. 

Good luck!

Brian

Mike Roberts wrote:
>
> Are you running in Windows Vista?  If you are, eQUEST must have 
> administrator privileges to write files where it needs to.  If you are

> getting any kind of output file, the end of the .sim file or the .bdl 
> file should give you an indication of what is going wrong.
>
>  
>
> Mike
>
>  
>
> -----Original Message-----
> *From:* bldg-sim-bounces at lists.onebuilding.org
> [mailto:bldg-sim-bounces at lists.onebuilding.org] *On Behalf Of *Shank, 
> Kurt
> *Sent:* 03/07/2008 12:58 PM
> *To:* bldg-sim at lists.onebuilding.org
> *Subject:* [Bldg-sim] Equest 3.6 simulation bug
>
>  
>
> Hi,
> I am having a problem w/the equest program.  When I run a simulation, 
> it gets to 18% complete, and the freezes up.  It displays 'ready' in 
> the bottom right corner, but no calculations are being performed.  If 
> I click anywhere in the program window, it lists 'not responding'.
> I've already uninstalled and reinstalled the program with similar 
> results.  Is there any way to solve this problem?  I am currently at a

> dead end and am not sure of any way to perform a simulation at this 
> point.  Any help would be greatly appreciated. thx.
>
> Kurt
>
> ----------------------------------------------------------------------
> --
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to 
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>   
> ----------------------------------------------------------------------
> --
>
> No virus found in this incoming message.
> Checked by AVG Free Edition. 
> Version: 7.5.516 / Virus Database: 269.21.4/1313 - Release Date: 
> 3/5/2008 9:50 AM
>   




More information about the Bldg-sim mailing list