[Bldg-sim] Boiler stack economizers modeling in eQuest
Aulbach, John
jaulbach at nexant.com
Wed Mar 5 16:40:04 PST 2008
I think Mark is right. That is the way I always did ii in DOE-2.1E, and
I am unaware of any enhancements to 2.2 (eQuest engine).
-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Mark Prince
Sent: Wednesday, March 05, 2008 4:03 PM
To: bldg-sim at lists.onebuilding.org; Timothy Howe
Subject: Re: [Bldg-sim] Boiler stack economizers modeling in eQuest
Tim,
I don't think eQuest has an option for a boiler stack economizer.
I had one on a past energy model. I increased the efficiency of the
boiler based on the heat I was recovering from the economizer.
Hope this helps.
mark
>>> "Howe, Timothy" <Timothy.Howe at stantec.com> 3/5/2008 9:40 AM >>>
Does anyone know how to implement a boiler stack economizer into an
eQuest model?
Thanks.
Timothy Howe
Mechanical Engineer
Stantec
_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
More information about the Bldg-sim
mailing list