[Bldg-sim] Equest: Solarwall, Trombe Wall modeling

[Karen Walkerman]

You could also experiment with creating a space of type "plenum" with the
dimensions and properties of a solar wall.  If I were taking the
experimentation route, this is where I would start.

~karen~

On Tue, May 27, 2008 at 4:04 PM, Eric Wilson <ejwilsn1 at uiuc.edu> wrote:

> Kevin,
>
> I've modeled a SolarWall, aka "Solar Air Heating" or transpired air
> collectors using RETScreen <http://www.retscreen.net/>.  They have a Solar
> Air Heating module that is included in the RETScreen 4 download.  If you
> don't mind modeling the SolarWall separate from the rest of the building,
> then that should work pretty well.
>
> *Eric Wilson*
> Smart Energy Design Assistance Center
> University of Illinois - Urbana-Champaign
> www.sedac.org
> (217) 244-4671
> (800) 214-7954
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080527/4d65f99c/attachment-0001.htm>