[Bldg-sim] Occupany Sensor on VAV Box

[Kevin Kyte]

Greetings,

Would anyone who has evaluated energy savings through the use of occupancy sensors controlling VAV boxes please share some experience, do's and don'ts, etc.
I believe the VAV boxes would have a minimum setback to 0% or 10% flow and possibly no reheat in the summertime.  I have been trying to model this with little success.  Is it possible to do using freeware or should I start constructing hourly reports.  Thank you all for your assistance.

Kevin

________________________________
"This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by e-mail and delete the original message."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20081029/149db5d1/attachment.htm>