[Bldg-sim] Peak Cooling Load

John Aulbach jra_sac at yahoo.com
Mon Aug 17 10:28:10 PDT 2009


Rathna:

The SS-A Peak Cooling is, of course, for the individual systems within a building. They are usually quite low as one does not usually specify the design cooling people, lights, equipment, etc in an energy model, which is what eQuest and Visual DOE represent.

You are also not having the peak internal loads coincide with each other and with the peak external cooling load.

I believe others on this forum can share similar experiences.

John R. Aulbach

--- On Mon, 8/17/09, Rathna Shree <rathnashreep at yahoo.in> wrote:

> From: Rathna Shree <rathnashreep at yahoo.in>
> Subject: [Bldg-sim] Peak Cooling Load
> To: bldg-sim at lists.onebuilding.org
> Date: Monday, August 17, 2009, 2:14 AM
> 
> Hi all,
>  
> I am a new member of the group. I work on visualdoe
> and Equest softwares. I have a basic question with
> reference to the peak cooling load. 
> The Peak cooling load is very less
> when compared to the cooling capacity of the system (by more
> than 50%) in some of the projects.. What is the reason for
> this? I am checking the Peak cooling load in SS-A
> report.
>  
> Thanks in advance.
>  
> Regards,
> Rathnashree
> 
> 
> 
> 
>        Looking for local information? Find it
> on 
> Yahoo! Local
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank
> message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
> 


      



More information about the Bldg-sim mailing list